Semi tulip salwar

This is a variation of the popular tulip salwar in which the leg pieces are not overlapped but stitch it at the front.
Is made as i show in the diagram
My recommendation here is to make it a little bit longer and adjust later if needed. These types of salwar where the leg pieces are semicircular always get shorter than we planned while making them.

Asymmetrical skirt

Pencil skirt Patterns

In the next class I'm going to teach you how to make a pencil skirt, so today we are going to make the patterns.
You need the basic skirt patterns, if you don't have them, you can find that class here: Basic skirt patterns.

We are going to make a simple transformation to our patterns marking the main point for a pencil skirt such as skirt length, seam allowances for the zipper and the back slit, and facing patterns for the waist.

Watch the video class:

Diagram for reference:

Lehenga with cape attached.

The cape in this design can be made full also, like a semicircular asymmetrical skirt, but i thought was interesting to make if we attach the cape in the side of the skirt, :)

Straight pants with elastic

Hello Clouds

Today i will explain you how to make straight pants with elastic. Not a tailored ones, since a lot of people is requesting me to make simpler pants patterns.

This project is perfect for beginners and you can use the same patterns to make a pajama, loose pants with drawstrings instead of elastic, or even attach belt and zipper or buttons if you gather the waistline.

These pants are perfect to be worn under kurtas, tunics, or  any long top.

Here you have the link to the video tutorial with all the process step by step, including the making of the patterns the cutting of the pieces and stitching.

just click on the image

And for reference, in this post i will show you the step by step to make the patterns, remember is always better to make patterns on paper so you can save it to make more garments.

So, lets start:

FRONT PATTERN

Start drawing a 90 degrees angle and mark the following:

NUMBER 1: (1/4 hips contour)+ 0.5" (why hips and no waist? because we need loosing to insert the elastic, and it must be slightly bigger than the hips so you wont be tight when put it on)

NUMBER 2: Crotch length ( For this pants no need to be exact because is usually low, so measure it directly on the body as shown in the picture below, is up to you where you want it, in the video i used 10" for the pants i made, just dont measure going inside, only straight vertical) and DONT INCLUDE the waistband,belt or elastic.

NUMBER 3: Pant length, from waist, downwards as much as you want,for long pants reach the ankle. But IMPORTANT: dont consider the waistband or belt or elastic here. we will add it later when cutting the fabric.

NUMBER 4: Trace a vertical line from the point 1
NUMBER 4a: Trace an horizontal line from the point 2 reaching the line 4
NUMBER 5: From the corner to the point 1,mark half of the segment and trace a vertical line to get the central line of your pant
NUMBERS 6 and 6´: From the point 3 trace an horizontal line. Decide the bottom width of your pant, (bottom leg width) and mark half of this measurement to every side of the central line. I wanted to be 8" so  i marked 4" to every side of the central line.

NUMBER 7: extend the line 4a to the left 1.5" and mark the point 7
NUMBER 8: trace the crotch curve as shown

Trace lines from 2 to 6´ , and from 7 to 6.
OPTIONAL: if you want your pant even more straight, trace the line 7 - 6 making a curve as shown.

And there you have the front pattern for your pants (red line in the right)

BACK PATTERN

NUMBER 9: From the left corner, mark 3 cm in the horizontal (waistline)
NUMBER 10: From the point 9 mark 3 cm upwards.
NUMBER 11: From the point 7 ( crotch corner) mark 3 cm out, to the left,and then from this point mark 1 cm downwards.
RIGHT IMAGE: Join the point 11 and 10 tracing the crotch curve as shown.
From the point 10 trace a line passing on the right corner of the waistline and extend it to have the same measurement than the front waistline, then join with the hips point and continue tracing the contour of the pattern.
Add 1 cm extra in the inner leg line and in the side leg line also as shown.

AND THERE YOU HAVE YOUR PANT PATTERNS :)

To cut and stitch, follow the video tutorial mentioned above, or here you have the link also:

https://www.youtube.com/watch?v=C-seyERXH8o

If you have any doubt tell me in a comment in this post.

Happy stitches ! 

Dhoti Salwar

Welcome to my website.
In this section i will share with you all the information i have about different types of salwars and lehengas, and obviously, tutorials to help you to make your own.
This section will be updated often :)

Lests start with one of the most popular salwars now a days:

Dhoti Salwar

Let´s have a look ...
How to make a Dhoti Salwar

Every detail is explained.Enjoy the video.
Please share with me photos of any of your creations at my fb page

happy stitches for everyone

Sandi

*special thanks to my dear friend Ba Hia for her help in this post